Changzhou Huiya Decoration Materials Co.,Ltd

Search

Products Categories
Contact Us
ADDRESS:No.45 Weifu Rd, Weixing Industry, Wujin District, Changzhou City, Jiangsu Province, 213103, China
MOBILE:+8618018280738
TEL:+86-519-83811288
FAX:+86-519-81187328
E-MAIL:
winston@czhuiya.com
Chipboard Raised Floor Systems

Chipboard Raised Floor Systems

Chipboard raised floor systems Introduction Chipboard raised floor systems composed of wooden particles bound together with thermosetting resins. In its 30mm and 38mm thickness the use of a laminate or resilient finish is recommended. The environmental conditions for its use should not be...

Send InquiryChat Now

Chipboard raised floor systems

Introduction

Chipboard raised floor systems composed of wooden particles bound together with thermosetting resins. In its 30mm and 38mm thickness the use of a laminate or resilient finish is recommended. The environmental conditions for its use should not be affected by problems associated with humidity and therefore for its maintenance it is necessary to limit the use of water.

Chipboard raised floor systems is produced with experience and knowledge of Integra based on many years in Manufacturing and Acquisition of well know brands in interior finishing materials.

With wide range of covering options, Chipboard raised floor systems can meet the various demands of the designers and give the modern commercial interiors neat and elegant appearance that have been cleared from cables and fittings.

Chipboard raised floor systems consists of 60 x 60 xm panels that can installed loose lay on steel substructure sytem.


System properties 

•Perfect cable management

•Service space for electricity, telephone and data cables

•Service space for ventilation, fire and safety systems

• Wide range of covering options

• Modular structure

• Contemporary and functional office appearance

•Easy and Quick Installation

•Rapid and Cost-effective layout changes

• Rapid and Cost-effective in reconfiguration

• No need to use cable carrier furniture systems


System properties

• General office areas

•High Rise Buildings

State offices

Airports

System rooms

Bank and insurance companies

Call centers

Data processing centers

Computer rooms/Classes

Laboratories

Electricity control rooms

Signalization rooms

 

TEST REPORT

In selection of right product in raised access flooring systems, the most important criteria are the loading performance and covering type of the panels.

The loading performances are shown as load-deflection class in the technical sheet of the panels. Therefore a typical classification might be outlined as 2/A where;

‘2’ represent the ‘ultimate load’

A’represents the ‘highest deflection’.


The values in the example refer to:

Ultimate load: 6 kN (600 kg) (25x25 mm applied on a point base.)

Deflection class: 2,5 mm (Maximum deflection under working load)

The working load and the safety factor will be also declared in the technicial sheet.

EN 12825 has now become widely accepted and adopted by the industry as superceeding the previous PSA graded system.

The classification in EN12825 is based on ultimate load when failure of the panel occurs. The floor systems are now classified due to four criterions; Ultimate load, safety factor, deflection and working load. EN 12825  is not advising which system would suit different applications, which means the responsibility of ensuring the correct floor is specified lies with the specifier or architect. Therefore, it is important for the companies to make the right decision according to the needs, in order to avoid high costs or low performance.


Load classes according to EN 12825

image002.gif

1≥4image010.gif
2≥6
3≥8
4≥9
5≥10
6≥12


Deflection classes according to EN 12825

image013.gif

A2.5
3.0
C4.0


Ultimate Load: Main criteria for classification. No failure will be observed in the system until to this load. The load is applied on a 25x25 mm area.

Safety factor: Two values have been determined for safety factor. 2.0 and 3.0

Deflection: The vertical replacement of panel before and after the working load is applied.

Working load: Calculated by dividing the lowest ultimate load to the safety factor. The system will not have a higher deflection than the mentioned deflection value under this load.

Hot Tags: chipboard raised floor systems, China, suppliers, manufacturers, buy, discount, price, tate quality, made in China
Related Products